Fitted Kitchens and Wardrobes, Made in Our Own Nairobi Workshop
Templated against the wall that was actually built, not the one on the drawing. Marine plywood where water is a certainty, hardware rated for the cycles it will actually see, and worktops templated only after the units are set and level.
From KES 12,000 per running foot
Apartment kitchen 10–14 running ft · family kitchen 18–26 · mid-spec family kitchen KES 290,000–570,000
Registration, insurance and the workmanship warranty stated in writing on every quotation
Get a written quotation
Tell us the shape of the project and we will come back with a realistic cost range before anyone visits. No obligation, and no site visit charge.
Start here
Most people planning a kitchen in Kenya want to know two things first: what it can look like, and what it costs. Both are set out properly rather than hidden behind an enquiry form.
What fitted joinery costs
| Work | Rate | Notes |
|---|---|---|
| Blockboard carcass, laminate fronts | KES 12,000 – 16,000 / running ft | Budget standard |
| Marine plywood carcass, MDF fronts | KES 16,000 – 22,000 / running ft | Where most clients land |
| Solid wood or high-gloss acrylic fronts | KES 22,000 – 28,000+ / running ft | Premium |
Rates reviewed 2026-08. Every job is confirmed with a written quotation before work starts.
Full detail on kitchen cabinet prices and fitted wardrobe prices. The carcass and the hardware drive the difference, see materials compared.
What we make
Why fitted joinery goes wrong in Nairobi
Six things that turn a good-looking kitchen into a disappointing one, and what we do about each.
Cut from the drawing, not the wall
Nairobi walls are rarely square: in the older Karen and Lavington stone houses, thirty millimetres out across a run is normal. Carcasses cut from an architect's drawing have to be forced into place, and forcing is why the doors never line up a year later. We template after plastering.
MDF with an unsealed edge under the sink
MDF is an excellent material and water destroys an unsealed edge permanently. That is not a property of MDF, it is a property of MDF nobody sealed. We seal every cut edge and specify marine plywood for the sink run regardless of budget.
Hinges chosen last
Hardware is rated in cycles and it is invisible on installation day. Cheap hinges on a kitchen opened three times a day begin to sag inside two years, and replacing them once fitted is tedious. Spend here rather than on the door finish.
Worktops templated too early
A worktop measured before the units are set and levelled will not sit right, and stone is not adjustable. Templating happens after installation, which means a return visit. Anyone offering to template beforehand is guessing.
The delivery route was never measured
A Westlands service lift caps panels at about two and a half metres; a Highridge stairwell is tighter still; a Runda island is bigger than the door. Sectioning planned in the workshop is invisible. Sectioning decided on the landing is not.
The deposit disappears
Money taken up front, workshop goes quiet, nobody answers. We work to staged payments against milestones (deposit on drawings approved, balance on delivery and installation) with an M-Pesa receipt at every stage.
MDF vs melamine vs solid wood, the material decides how long a kitchen lasts far more than the design does.
Areas we cover
Frequently asked questions
- What does a fitted kitchen cost in Kenya?
- KES 12,000 to 28,000+ per running foot depending on carcass material and hardware. A typical family kitchen of 18–26 running feet at mid specification lands between KES 290,000 and 570,000 for the joinery. Worktops and appliances are separate.
- What is a running foot?
- The horizontal length of the run, counting floor and wall units together, so a 3-metre wall with cupboards above and below is about 10 running feet, not 20. Insist on the unit; a quote with a figure and no unit cannot be compared to anything.
- How long does a kitchen take?
- Six to eight weeks from approved drawings to installation is typical for a fitted kitchen, with worktops following after the units are set and levelled. We survey and template on site after plastering rather than working from the drawings, and we confirm your dates in writing once the design is signed off.
- MDF, melamine or plywood?
- Marine plywood under the sink without argument, melamine-faced board for the rest of the carcass, MDF for sprayed and shaker fronts. That combination puts the money where the failures actually happen. The materials page sets out why in full.
- Do you make wardrobes as well as kitchens?
- Yes, and they are half our work. Built-in wardrobes, walk-in closets and dressing rooms, priced the same way per running foot. A built-in wardrobe is a different product from the freestanding furniture sold online, see the wardrobe prices page.
- Where is the workshop?
- In Nairobi, and everything is made there rather than imported flat-packed or subcontracted out. It is why we can match a profile in a period Muthaiga house and why we can section an island to clear a Runda doorway.
- Which areas do you cover?
- Across Nairobi: Karen, Runda, Muthaiga, Gigiri, Kitisuru, Lavington, Kilimani, Kileleshwa, Westlands, Parklands, Lang'ata and the Kiambu Road corridor.